Your car's tires play a key role in preserving your safety while you're on the road. If the treads wear down too far, you'll risk hydroplaning on wet surfaces. You'll also risk a potential blowout. By checking the pressure and tread wear periodically, you can prolong their life, changing them when necessary. The challenge is buying the right set of replacements for your vehicle.

Buying a new set of tires is simpler than a lot of people realize. But you must know what you're looking for. Some models are larger than others; some are noisier; some offer a smoother ride and are more responsive to steering commands. Below, I'll provide five tips that will help you navigate through the available options.

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

When you pull up to that pump and realize that you just don't want to drive anymore, it can be really hard to go to work the next day and know that maybe half of your paycheck is going to go to the stupid gas companies. While the gas companies are happy, the average consumer is struggling day by day just to drive back and forth to work. Until we get some alternative fuel source that the majority of America uses, we are going to be stuck with gasoline. Instead of pulling up to the gas pump and paying full price next time, you may want to consider some alternatives.

Carpooling - Do you know of anyone at your place of work that lives nearby? If you do, maybe you can work out an arrangement where you can drive each other in every other day or week and cut back on half of the gas. Instead of taking two cars, you know can take one and save. If you don't know of anyone at your work, you can always try the state funded carpool assistance programs. These programs will find people that are in need of a partner like you and the state will help assist you.

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

So, you think you know your cars now, do you? Well, consider this to be a test of your knowledge of Pontiac history maxicheck pro. 21 Pontiacs are featured here: some are current models while others are truly classic in every sense of the word, dating back to the early 1960s.

6000 ?Full sized [or almost] front wheel drive sedan of the 1980s.

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

How to Test a Bad Fuel Injector A digital multimeter will help diagnose problems with the fuel injectors in your vehicle. A bad fuel injector in your vehicle can cause your engine to idle roughly,can increase fuel consumption,and can lead to other performance problems. In most cases,you can trace problems with a bad fuel injector to a clogged nozzle,stuck valve or failed coil. With the correct tools,you can diagnose a suspected bad injector before you decide to replace it unnecessarily. This procedure applies to fuel injectors found on electronic fuel injection,or EFI,systems only. Things You'll Need  4 wooden blocks Mechanic's stethoscope Digital ohmmeter Nod light,if necessaryInstructions 1. Park your car in a well-ventilated area Launch X431 Diagun. Open the hood of your vehicle and apply the parking brake. 2. Set the transmission in Park (automatic transmission) or Neutral (manual transmission). Block the rear and front wheels with wooden blocks and start the engine. 3. Put on a mechanic's stethoscope and probe the suspected fuel injector by placing the tip of the tool against the injector's body. You should hear a series of clicks as the injector's valve opens and closes. If you do not hear the clicks,the injector is bad or not receiving power. Turn off the engine. 4. Unplug the electrical connector on the suspected fuel injector. Set your digital ohmmeter to a low range on the Ohm scale. Turn on the meter and probe both electrical contacts on the injector with your meter probes. If you get a blank screen on your meter's display,the coil inside the injector has an open. A reading of "" on the meter's display indicates the injector's coil has a short to ground. In each case,you need to replace the injector. If your meter's display shows a resistance value other than "0," check the service manual for your particular vehicle to make sure you have the correct value and proceed to the next step. 5. Connect a nod light on the harness connector of the suspected fuel injector. Start the engine. The nod light should flash on and off. If you did not hear the injector clicking in step 3,this means the control module is feeding power to the injector,but the injector is not responding and should be replaced. If the nod light does not flash,you need to check the circuit and components that feed power to that injector. 6. Turn off the engine. 7. Plug in the harness connector to the suspected fuel injector and close the & Warnings Fuel injectors may clog with sludge,rust and other contaminants over time,affecting engine performance. If you still suspect injector problems,even if they tested Ok,take your vehicle to a qualified auto shop and have them clean the fuel injection system. Most auto part stores carry mechanic's stethoscopes,digital ohmmeters and nod lights to help you diagnose fuel and other car system's problems Car Repair Tool.
Related Links

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

trouble code (DTC) reader is really a versatile tool that can help in identifying why the Check Engine or malfunction indicator light (MIL) originates on in On-Board Diagnostics (OBD) II automobiles. All cars which were offered in 1996 and then years are certain to be OBD-II cars because federal legislation had purchased all vehicle producers to produce their autos OBD-II compliant. You will continue to use of your vehicle despite the Check Engine light has switched on but when the reason is serious, a worst situation scenario may be the stalling of the vehicle.
The truth is there are many conditions that may trigger the MIL or Check Engine warning light. Fortunately, the Autel MD802 Scanner will help you have the DTC and you may search on the internet and check exactly what the code mean autel maxitpms. The activation from the warning light generally implies that the engine is getting problems running in the greatest efficiency. The best way to achieve this kind of efficiency to lessen gas pollutants is really a complicated process since it is impacted by several dynamic factors, including speed, engine temperature, road conditions, load, ambient air temperature, gasoline quality and others. The OBD that is a special type of computer that's specific for cars, trucks and vans, constantly monitors the numerous factors and immediately activates the Check Engine light whether it has recognized a problematic situation.

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

About erroneous sights on vehicle maintenance
Myth: The greater affordable lower grade fuel?

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

10 Most Common Transmission Problems Determining what problem(s) your car has may seem like an impossible task,especially to the untrained eyes and ears of the average driver. It may be helpful to think of your car's inner workings as similar to that of the human body. For instance,if you have chest pain that could point toward any number of health issues,but if the chest pain exists in addition to difficulty breathing,then it is much more likely that asthma (or something very similar) is the cause. Automotive problems are diagnosed in a similar manner. Problems that involve mechanical systems typically exhibit distinct sensations and sounds that act as indicators that a certain process isn't working the way it is intended to. As soon as you recognize that something seems a bit "off" with your vehicle's functionality,it is time to assess the issue and look for a way to fix it. Diagnosing car problems yourself may seem like an impossible task,but try to think of it in terms of your own body. For instance,if your stomach begins to hurt without warning,you'll probably start thinking of the last thing you ate in order to figure out why you're having the pain. A similar type of thinking goes into diagnosing car trouble.This is usually caused by a clutch that needs to be replaced,but may sometimes point to a more severe problem. Whining,Clunking and Humming It's impossible to say exactly what your car will sound like when there is trouble with your transmission,but one thing is for sure,you'll get a "I haven't heard that sound before" feeling when you notice it TPMS. The sounds that are produced vary widely between different makes and models,but the best way to describe them is that you'll probably hear a humming,buzzing or whining noise. Manual transmissions will emit sounds that can be described as being slightly more mechanical,louder and abrupt sounding. A clunking sounds when you shift gears almost always lies within a transmission,while constant velocity joins or the differential may be the source if the clunking is coming from the underside of your car. As mentioned already,it is always best to get the problem diagnosed and repaired as soon as possible and not wait until later when you "find the time" or "have the money". If you wait until later what would have been a relatively inexpensive repair can easily become a much more costly one. Leaking/Low Fluid A leak is probably the most recognizable symptom and should be repaired as soon as possible. Letting the fluid leak is one of the most common causes transmission break down. Automatic transmission fluid (ATF) is the life-blood of a transmission as it lubricates,cleans and conditions the seals and acts as hydraulic fluid. Without it (or even if it gets too low),the engine will seize up and stop working completely. Transmission fluid helps keep the parts lubricated and cooled so that they don't get worn out and damaged. If the fluid breaks down,the system runs too hot which it results in increased friction and corrosive activity as well as the build up of additional sludge and debris x431 obd tool. If this is not taken care of,the transmission will eventually damage itself enough to break down completely. The end result is an expensive replacement. Common causes include low fluid level or using the incorrect brand/type of fluid. To check for these,see the instructions in the section on Low/Leaking Fluid above. Refuses to Go Into Gear If the car will not shift after engaging the clutch and trying to move the stick,take a look at the fluid to make sure that it is at the right level. Other causes include using the incorrect thickness (type) of fluid and the clutch linkage or shift cables needing adjustment. The source of the problem could also be the vehicle's computer system. If you've already inspected the fluid,you can try resetting it. To do this,detach the battery and let it stand for thirty minutes. Then,reattach and allow the system to reset itself. This usually takes around thirty minutes. If this doesn't work either,then it's time to take it to a mechanic. Check Engine Light Check Engine LightThe check engine light located on your car's dashboard is a great early indicator that something is about to go wrong (or already has) with your car,and in particular with your transmission.This difficulty is accompanied by a grinding noise each time you try to change gears. Fortunately,this problem is considerably less expensive to repair than many other issues. More often than not,the cause of this is too much slack in the clutch pedal. With too much slack available,the linkage between the clutch disk and pedal can't pull the clutch disk away from the flywheel. Conclusion It is important to keep up a regular maintenance schedule for your car. Many times major expensive repairs can be avoided if the vehicle is properly maintained. This is especially true if you notice something unusual. The car should be taken in immediately for service. Brushing up on your knowledge of transmissions (at least the basics) is highly recommended as it can help you save money by avoiding costly inspections and doing simple procedures such as changing transmission fluid yourself as well as making you knowledgeable enough to avoid being over-repaired,over charged or simply ripped off.
Related Links

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

Why & how often you should wax your car? Do you see a wax job as being an added luxury for your car,something that is done every once and a while just to add a little extra shine to your vehicle? If you do,you may just see the effect that lies before your eyes. Although ignoring your paint job may not result in any vehicle related mechanical issues,it certainly will affect your car's resale value. Nowadays,people argue a lot about the necessity to wax a car since most cars now have a protective clear coat a clear resin applied over the colored resin. The clear coat is there to play the role of a protective barrier,so why wax? There are arguments for and against waxing. As myself,I suggest that we look at this yes-or-no question from another angle-car waxing does exit and the waxing industry has no signs of diminishing trend,so it do have reasons to exist. In my opinion,I fall in the yes side. Let me tell you some facts about car waxing. Clear coat is not bulletproof,while it does offer some level of protection from menaces such as ultraviolet rays,weather,dirt and debris it shouldn't become your excuse for the elimination of waxing Launch X431 Diagun. The wax is important because it will offer protection against all sorts of elements like weather,oxidation,road debris,bugs and tree sap,and it will also help remove or disguise minor blemishes or light scratches. Some experienced car owners imply that the clear coat also needs to be cared for and unwaxed car is likely to have paint damaged. Moreover,it lowers your need to preform further detailing treatments. Our next topic is how often you should wax your car. In order to maintain the shine and color of your vehicle it is a good idea to consistently wax a car on a regular basis. But how often is too often,or not often enough? You always hear "wax four times a year" with the seasons,but does this apply for every vehicle? Surely not,we can use it as a general guideline,but different cars have different stories to tell autel mx-sensor. In addition,even for the same car,the answers vary. However,here I conclude some of the important signs that are telling you the need for a car waxing. 1. Dry paint. Dry paint is similar to that of dry hands; it is one of the most common signs of paintwork neglect. Like you apply skin moisturizer to keep your hand from dry,you just need a car waxing job to replenish lost oils (due to penetrating UV rays) in the paintwork and nourish the paint to relieve the stress it has burdened due to dryness. 2. Newly visible light scratches. Do you know that minor imperfections such as clear coat scratches and light swirl marks have been embedded into your paint before you even own the car? Make a simple wax to fill these imperfections and protect the surface from future problems as well. 3. After polishing. We suggest you wax after a polishing procedure. It's the wax's job to seal in the hard work of polishing. Waxing helps to protect the newly polished vulnerable paint and extend its use life. You waxing will pay off in the long run. So why not have a regular car waxing?
Related Links

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

Nowadays, the protection of the environment has become a priority. If everyone is aware of it and everyone to do some small change which will have a significant role in protecting the environment. Protection of the environment is not just recycling cans and conservation of electricity, which can also be extended to the car driving. If you timely detect your car's exhaust emissions and fuel consumption, you can also contribute to environmental protection. LAUNCH X431 Pro Auto Diag Scanner was developed for Internet applications based on Andriod system of the new automotive fault diagnostic equipment. It car models wide coverage in the automotive fault diagnosis technically testing powerful, special features and more accurate test data as well as many other advantages, through the vehicle diagnostic connector and Bluetooth mobile intelligent terminal communication, achieve product all models, system-wide car troubleshooting. Do you know why the car is so easy to do diagnostic now? Improved automatic detection system to help automobile timely get rid of fault. Since 1996, after the car is equipped with computer-based diagnostic systems, owners no longer need to go to repair station and have to pay high maintenance costs. When your car has a problem, you no longer need to find a repair station which distant from the site of the accident. This is attributed to car OBD diagnostic, you can test what's wrong with your car anywhere. The new OBD diagnostic system include an interface cable, this cable is used to connect the device OBD computers and laptops. We can use a USB or Bluetooth connection to the OBD diagnostic system. So what do automotive diagnostic help you? It can help you accurately Identify potential problems and displays an error code. It not only can help you identify the cause of the problem but also to take timely preventive measures. This means that it can help for you to save a large sum of testing costs in your long journey. All errors think that the car have problem with car start Launch X431 Diagun, now can easily solve by OBD diagnostic system. LAUNCH X431 Pro Auto Diag Scanner can help you keep track all the critical systems of your car. These tools in our car we would be safer while driving launch x431 pro plus. It could timely understanding of the status of your car, testing fuel consumption and emissions, so that you contribute to protect the environment. It can quickly detect cars cause of the problem and avoid maintenance division dishonest evaluation then help you save time and money. A diagnostic tool can give you help and bring you great convenience for your driving, you really need this product. This product is now readily available on the market.
Related Links

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()

Summer driving attention to three issues Auto ignition: Reducing modified periodically check Prevent the car ignition; the most basic method is to periodically do maintenance to the car, check the engine, and an oil circuit, to see whether the aging and oil spills. Do not store in a non-standard vehicle repair or modification, because of some wrong operation of Luanda wires, easy to friction is not effective at a fixed, will be dangerous. If the modified car, especially lights, sound, etc., should be comprehensive examination. In the hot summer, do not lighters, fragrances, air fresheners and other flammable items placed under prolonged exposure to high temperatures inside the car to avoid swelling caused by physical explosion sparking spontaneous combustion; After a long journey, it should be appropriate to let the car rest what to avoid overload Porsche Piwis II. When driving, vehicle owners should be aware of signs of spontaneous combustion, such as an odor, abnormal sound or vehicle electrical malfunction and so on. Reminder: The best car standing on a fire extinguisher. Once spontaneous combustion, the first car in the right place few people pull over, turn off the heat, remove the fire extinguisher, look for fire points to the part of the cooling tank and burning fire to avoid explosion. Prevention tire: tire pressure down promptly repair The hot summer is high season car tire. Due to the high temperatures, low quality or if the tire itself tire pressure is too high, the tire after gas expansion will lead to a puncture. Therefore, we recommend that owners will be tire reduced by 10%, adjusted to 2.2 kpa. Owners should pay more attention this season on tire maintenance, if damage is discovered, it should be promptly repaired or replaced. If you have patched the tire, it is best to put the rear wheels or as a spare tire. In addition, particular attention not to let the summer tires collision obstacle, because it is easy to make the tire sidewall injuries caused problems. Reminder: If the tire which occurs in the driving, the driver applied the hand tightly control the steering wheel, slow step on the brake, the vehicle smooth deceleration stop. Do not be an emergency brake, because it is easy to cause the flick even rollover. Water temperature exceeded: Timely parking thermal cooling Summer car drivers who not only baked, vehicles will be unable to withstand high temperatures, excessive water temperature is relatively common, even "boil" boiling. Summer car owners should always pay attention to see when the water table, look at whether the water tank. Driving, if you find the water table pointer nearing the red line, it should reduce the speed as soon as the car drove into a cool place to stop. To avoid engine damage, do not immediately turn off after stopping, but should let the engine idle for a period of time before. If the water temperature is still not fall down launch x431 pro plus, you should turn off the car, check the engine coolant. But be careful not to open the radiator cap immediately, otherwise it is easy to steam burns. If it is because of lack of coolant, it would first make up. Reminder: If the water temperature is too high the phenomenon, do not let the car on long journeys, because for a long time with a lot of damage to the engine water temperature is not under normal circumstances; do not slow down especially not choose congested roads. Here we recommend some car diagnostic tools can help you test your car by yourself, such as: Launch GDS, Autel Maxisys pro, Autel MaxiTPMS TS501 and so on. If you want to know some car maintenance information, please click the below information: Better Website
Related Links

文章標籤

aogoodecig 發表在 痞客邦 留言(0) 人氣()